Heat-regulation installation kit ICBOX-4

(VT.ICBOX.4) Thermo-regulation installation modules VT.ICBOX are meant for creating water based heated floors over an area up to 15 sq.m, wall heating or regulation operation of of water based heating devices. The VT.ICBOX kits enable you to connect low-temperature circuit to the primary heating contour without a pumping-mixing unit. In case of use of these modules for regulation of heating devices operation, it is not necessary to install thermo-regulators directly on radiators and convectors, and the quality of heat regulation is improved (absence of convective flows influence).

VT.ICBOX-4 is an installation kit purposed for automatic regulation of a heat flow from one or more heating appliances.

Control of the thermostatic valve of the kit is performed by an ordinary thermostatic head (as against VT.ICBOX.5, in which control is carried out either by a thermal head with a remote sensor or by a servo-motor on command of the room thermostat).

The kit includes a balancing valve, a thermostatic valve, a manual air-release valve and a junction box with a cover. The thermal head should be bought separately.

VT.ICBOX-4 module is designed for use in the systems with nominal pressure 10 bar and working temperature up to 100 °C.