Steel collector with center distance between outlets 100 mm

(VTc.510.BS) Steel collector with the pitch of outlet connections increased up to 100 mm is designed for assembling floor distribution units (e.g., for group installation of water meters for apartments in floor metering stations of apartment houses).

The collector is characterized by the passage section greater than that of brass analogues, which contributes to normal pressure equalization of the connected consumers. Center to center distance of outlet connections is 100 mm. Thread of connections: external 1/2". Number of outlet connections: from 2 to 9. Collector thread: male 1". ½" orifice is present in the upper part of the collector with internal thread for air vent valve or manometer gage.

The collector is rated for operation pressure 16 bar and for the maximum temperature of operating medium 110 °C.


ArticleSize / number ofPrice per unit
VTc.510.BS.0604021", 2 x 1/2", 40 mm1560
VTc.510.BS.0604031", 3 x 1/2", 40 mm1781
VTc.510.BS.0604041", 4 x 1/2", 40 mm1962
VTc.510.BS.0604051", 5 x 1/2", 40 mm2185
VTc.510.BS.0604061", 6 x 1/2", 40 mm2377
VTc.510.BS.0604071", 7 x 1/2", 40 mm2610
VTc.510.BS.0604081", 8 x 1/2", 40 mm2833
VTc.510.BS.0604091", 9 x 1/2", 40 mm3032
VTc.510.BS.500604031", 3 x 1/2", 50 mm2213
VTc.510.BS.500604041", 4 x 1/2", 50 mm2391
VTc.510.BS.500604051", 5 x 1/2", 50 mm2612
VTc.510.BS.500604061", 6 x 1/2", 50 mm2879
VTc.510.BS.500604071", 7 x 1/2", 50 mm3229
VTc.510.BS.500604081", 8 x 1/2", 50 mm3478
VTc.510.BS.500604091", 9 x 1/2", 50 mm3865
* Prices shown are recommended retail prices by the manufacturer

 

Manifolds for water