Flow invertor for Y-filter

(VT.116.N) A wide-spread error of sanitary technicians who perform installation of utility systems for apartments is incorrect installation of mechanical cleaning filters, which entails accumulation of slug not in the filtration chamber but in the pipe circuit. To rectify such drawback on a horizontal section it is enough to turn the filter into the correct position. On the vertical pipe circuit, when the water is supplied from bottom to top, it is necessary to organize a horizontal section, while the place and the possibility for this are not always available. In such case one may substitute the Y-filter with VT.386.N universal one or apply a flow inverter for VT.116.N Y-filter.

Realized of CW617N nickeled brass, flow inverter is inserted into the filtration chamber of an ordinary Y-filter and turns the flow in such a way to let the slugs remain between the inverter and the filter mesh. The inverter is supplied together with a stainless steel mesh.