Universal axial fitting – short radiator elbow with slow turn chrome-plated brass tube

(VTm.481.PC) Slip fittings (axial fittings) of VTm.400 series are purposed for mounting of pipes made of cross-linked polyethylene (PEX) with the following geometrical parameters (external diameter/ wall thickness): 16,0 x 2,2, 20,0 x 2,8, 25,0 x 3,5, 32,0 x 4,4 mm.

As the result of mounting of VALTEC axial fitting, dead connection is obtained, not requiring any maintenance, which allows both open and nonexposed installation of the pipeline, including with incorporation of the fitting into the civil structure (in absence of a passage to the thread). Tightness of the connection is obtained due to tube material embossing into the borings in fitting body union which takes place when the sleeve is slipping onto the fitting body union.

VALTEC axial fittings do not restrict the diameter of connected pipelines due to extension of pipe ends before performance of connection.

Elbows with slow turn chrome-plated brass tube VTm.481.PC are designed for connection of heating device (radiator) fittings to the pipe connection layout. Tube length is 30 cm. If the radiator fittings are located underneath, the excessive tube is cut off with a wheel cutter. The pipe is connected to “Eurocone” fittings by means of VT.4430 crimp connection.

The housing of VTm.481 fitting is made of hot-stamped CW617N brass. Like the brass tube included in the fitting construction, it has a chromium plate.Fitting installation is carried out using VTm.400.BC chrome-plated thimble and manual (VT.1240.FT) or electric (44067-51 or 48348-51) tools.

Elbow axial fitting with a slow turn brass tube (axial radiator elbow) is designed for use in the systems with the nominal pressure up to 16 bar and the maximum operating temperature not exceeding 95 °C.

The length of the fitting tube is 30 cm. If the fittings are located underneath, it is necessary to measure the required tube length first and then cut off the excess with a wheel cutter.

VTm.481.PC elbow axial fitting with chrome-plated brass tube can be fixed to the base using VT.481.KS.01 steel bracket.

ArticleSize / number ofPrice per unit
VTm.481.PC.00161516 (2,2) х 15 mm, 30 sm764
VTm.481.PC.00201520 (2,8) х 15 mm, 30 sm783
* Prices shown are recommended retail prices by the manufacturer

 

Universal axial fittings