Thermostatic angular valve with axial control, presetting and an additional sealing

(VT.180.NER) Thermostatic angular valve with axial control has the following advantage: the temperature sensor installed on it (thermal head) is located outside the area of influence of heat flows from the heating device and the supply pipelines, which improves adjustment accuracy.

    Regulation of heating medium flow through the heater via this valve can be performed:
  • manually using the complete adjusting cap (this method is not recommended by us);
  • automatically using a thermostatic head (sold separately), depending on the internal air temperature in the room;
  • automatically using electrothermal servo (sold separately), on command of the control unit (indoor thermostat controller; condominium automation unit, etc.).

Use of thermostatic valves with thermal heads (thermostats) allows automatic maintenance of air temperature in the premises at the given level accurate to 1 °C.

Availability of presetting function in this valve makes possible to refuse from installation of a setting valve at the outlet of the heater.

VT.180.NER valve is equipped with an additional sealing on the nozzle connecting to the heater: the thread of the nozzle connecting to the pipeline is external, for "eurocone" standard fitting.

ArticleSize / number ofPrice per unit
VT.180.NER.041/2" х 3/4" («eurocone»)969
* Prices shown are recommended retail prices by the manufacturer

 

Thermostatic radiator valves